ABSTRACT
The present case report describes an unusual variant of a missing medial tarsal artery (MTA) being replaced by the anterior medial malleolar artery (AMMA). The dorsalis pedis artery (DPA) did not give off any branches to the medial foot. The DPA coursed downward in the foot along with the superficial fibular nerve on the foot dorsum at the lateral side of the first metatarsal bone before entering the sole. In the medial malleolus, the AMMA arose from the anterior tibial artery and then ramified several branches, one of which descended to the medial talus. Thus, the possibility of a missing MTA being replaced by the AMMA should be considered by surgeons and radiologists when various surgeries are performed in the medial tarsal area.
ABSTRACT
The aims of this study were to clarify the topography and variations stylopharyngeus (STP) and superior constrictor (SC) muscles, and to examine what role they play in the pharyngeal movement. Forty-four specimens (22 right and 22 left sides) from embalmed Korean adult cadavers (13 males, 9 females; age range, 46–89 years; mean age, 69.2 years) were used in this study. The accessory bundle of STP and petropharyngeus was found in 18.2% (8/44) and 25.0% (11/44) of cases, respectively. A variation of the STP, in which it ran transversely and merged with the SC muscle, was found in 2.3% (1/44) of cases while a variation of the SC muscle, in which it ran longitudinally and merged with the contralateral constrictors, was found in 11.4% (5/44). The variant muscle bundles play their own role in pharyngeal movement according to their morphology. These results provide information that will help a comprehensive understanding of the effects of pharyngeal muscles on movement.
ABSTRACT
The aims of this study were to clarify the topography and variations stylopharyngeus (STP) and superior constrictor (SC) muscles, and to examine what role they play in the pharyngeal movement. Forty-four specimens (22 right and 22 left sides) from embalmed Korean adult cadavers (13 males, 9 females; age range, 46–89 years; mean age, 69.2 years) were used in this study. The accessory bundle of STP and petropharyngeus was found in 18.2% (8/44) and 25.0% (11/44) of cases, respectively. A variation of the STP, in which it ran transversely and merged with the SC muscle, was found in 2.3% (1/44) of cases while a variation of the SC muscle, in which it ran longitudinally and merged with the contralateral constrictors, was found in 11.4% (5/44). The variant muscle bundles play their own role in pharyngeal movement according to their morphology. These results provide information that will help a comprehensive understanding of the effects of pharyngeal muscles on movement.
ABSTRACT
Subject(s)
Humans , Curriculum , Education , Learning , Lecture , Methods , Oral Hygiene , PlasticsABSTRACT
PURPOSE: Special care is necessary to avoid invading important anatomic structures during surgery when presurgical planning is made based on radiographs. However, none of these types of radiography represents a perfect modality. The purpose of this study was to determine the reliability of presurgical planning based on the use of two types of radiographic image (digital panoramic radiography [DPR] and cone-beam computed tomography [CBCT]) by beginner dentists to place implants, and to quantify differences in measurements between radiographic images and real specimens. METHODS: Ten fresh cadavers without posterior teeth were used, and twelve practitioners who had no experience of implant surgery performed implant surgery after 10 hours of basic instruction using conventional surgical guide based on CBCT or DPR. Two types of measurement error were evaluated: 1) the presurgical measurement error, defined as that between the presurgical and postsurgical measurements in each modality of radiographic analysis, and 2) the measurement error between postsurgical radiography and the real specimen. RESULTS: The mean presurgical measurement error was significantly smaller for CBCT than for DPR in the maxillary region, whereas it did not differ significantly between the two imaging modalities in the mandibular region. The mean measurement error between radiography and real specimens was significantly smaller for CBCT than for DPR in the maxillary region, but did not differ significantly in the mandibular region. CONCLUSIONS: Presurgical planning can be performed safely using DPR in the mandible; however, presurgical planning using CBCT is recommended in the maxilla when a structure in a buccolingual location needs to be evaluated because this imaging modality supplies buccolingual information that cannot be obtained from DPR.
Subject(s)
Humans , Cadaver , Cone-Beam Computed Tomography , Dental Implantation , Dentistry , Dentists , Equipment and Supplies , Hypogonadism , Maxilla , Mitochondrial Diseases , Ophthalmoplegia , Radiography, Panoramic , ToothABSTRACT
PURPOSE: Special care is necessary to avoid invading important anatomic structures during surgery when presurgical planning is made based on radiographs. However, none of these types of radiography represents a perfect modality. The purpose of this study was to determine the reliability of presurgical planning based on the use of two types of radiographic image (digital panoramic radiography [DPR] and cone-beam computed tomography [CBCT]) by beginner dentists to place implants, and to quantify differences in measurements between radiographic images and real specimens. METHODS: Ten fresh cadavers without posterior teeth were used, and twelve practitioners who had no experience of implant surgery performed implant surgery after 10 hours of basic instruction using conventional surgical guide based on CBCT or DPR. Two types of measurement error were evaluated: 1) the presurgical measurement error, defined as that between the presurgical and postsurgical measurements in each modality of radiographic analysis, and 2) the measurement error between postsurgical radiography and the real specimen. RESULTS: The mean presurgical measurement error was significantly smaller for CBCT than for DPR in the maxillary region, whereas it did not differ significantly between the two imaging modalities in the mandibular region. The mean measurement error between radiography and real specimens was significantly smaller for CBCT than for DPR in the maxillary region, but did not differ significantly in the mandibular region. CONCLUSIONS: Presurgical planning can be performed safely using DPR in the mandible; however, presurgical planning using CBCT is recommended in the maxilla when a structure in a buccolingual location needs to be evaluated because this imaging modality supplies buccolingual information that cannot be obtained from DPR.
Subject(s)
Humans , Cadaver , Cone-Beam Computed Tomography , Dental Implantation , Dentistry , Dentists , Equipment and Supplies , Hypogonadism , Maxilla , Mitochondrial Diseases , Ophthalmoplegia , Radiography, Panoramic , ToothABSTRACT
PURPOSE: This study evaluated the surface characteristics and bond strength produced using a novel technique for coating hydroxyapatite (HA) onto titanium implants. METHODS: HA was coated on the titanium implant surface using a super-high-speed (SHS) blasting method with highly purified HA. The coating was performed at a low temperature, unlike conventional HA coating methods. Coating thickness was measured. The novel HA-coated disc was fabricated. X-ray diffraction analysis was performed directly on the disc to evaluate crystallinity. Four novel HA-coated discs and four resorbable blast medium (RBM) discs were prepared. Their surface roughnesses and areas were measured. Five puretitanium, RBM-treated, and novel HA-coated discs were prepared. Contact angle was measured. Two-way analysis of variance and the post-hoc Scheffe's test were used to analyze differences between the groups, with those with a probability of P<0.05 considered to be statistically significant. To evaluate exfoliation of the coating layer, 7 sites on the mandibles from 7 mongrel dogs were used. Other sites were used for another research project. In total, seven novel HA-coated implants were placed 2 months after extraction of premolars according to the manufacturer's instructions. The dogs were sacrificed 8 weeks after implant surgery. Implants were removed using a ratchet driver. The surface of the retrieved implants was evaluated microscopically. RESULTS: A uniform HA coating layer was formed on the titanium implants with no deformation of the RBM titanium surface microtexture when an SHS blasting method was used. CONCLUSIONS: These HA-coated implants exhibited increased roughness, crystallinity, and wettability when compared with RBM implants.
Subject(s)
Animals , Dogs , Bicuspid , Coated Materials, Biocompatible , Crystallins , Dental Implants , Durapatite , Hydroxyapatites , Mandible , Titanium , Wettability , X-Ray DiffractionABSTRACT
PURPOSE: This study evaluated the surface characteristics and bond strength produced using a novel technique for coating hydroxyapatite (HA) onto titanium implants. METHODS: HA was coated on the titanium implant surface using a super-high-speed (SHS) blasting method with highly purified HA. The coating was performed at a low temperature, unlike conventional HA coating methods. Coating thickness was measured. The novel HA-coated disc was fabricated. X-ray diffraction analysis was performed directly on the disc to evaluate crystallinity. Four novel HA-coated discs and four resorbable blast medium (RBM) discs were prepared. Their surface roughnesses and areas were measured. Five puretitanium, RBM-treated, and novel HA-coated discs were prepared. Contact angle was measured. Two-way analysis of variance and the post-hoc Scheffe's test were used to analyze differences between the groups, with those with a probability of P<0.05 considered to be statistically significant. To evaluate exfoliation of the coating layer, 7 sites on the mandibles from 7 mongrel dogs were used. Other sites were used for another research project. In total, seven novel HA-coated implants were placed 2 months after extraction of premolars according to the manufacturer's instructions. The dogs were sacrificed 8 weeks after implant surgery. Implants were removed using a ratchet driver. The surface of the retrieved implants was evaluated microscopically. RESULTS: A uniform HA coating layer was formed on the titanium implants with no deformation of the RBM titanium surface microtexture when an SHS blasting method was used. CONCLUSIONS: These HA-coated implants exhibited increased roughness, crystallinity, and wettability when compared with RBM implants.
Subject(s)
Animals , Dogs , Bicuspid , Coated Materials, Biocompatible , Crystallins , Dental Implants , Durapatite , Hydroxyapatites , Mandible , Titanium , Wettability , X-Ray DiffractionABSTRACT
The digastric muscle is located in the suprahyoid region which consists of anterior belly, intermediate tendon and posterior belly. This muscle is an important landmark when performing an operation of submental and upper neck region. Previous researches have reported about variations of the anterior and posterior belly of digastric muscle. However, there are few studies about the general morphology of the digastric muscle and the relationship with surrounding muscles. The purpose of this study was to analyze the morphology of the anterior belly of digastric muscle and confirm the topographic relationship between the digastric muscle and the stylohyoid muscle of Korean. Thirty-four cadavers (21 males, 13 females; mean age 65 years; range 24~89 years) were used in this study. The skin, subcutaneous tissues, superficial fascia and platysma were removed and a detailed dissection was performed, with extreme care being taken not to damage underlying the muscles of submental and upper neck region. After the dissections, all specimens were sketched and photographed. In 8 specimens, we observed the accessory bellies of the anterior belly of digastric muscle. We classified the accessory bellies into the crossover type (five specimens, 14.7%) that cross the mandibular raphe and unilateral type (three specimens, 8.82%). The findings resulting from observation of the anatomical relationship between the posterior belly of digastric and stylohyoid muscles, the posterior belly of digastric muscle perforated the stylohyoid muscle in 32 cases (65%) out of 49 sides. This case was subdivided into the belly of the stylohyoid muscle lean to the lateral (twenty-one specimens, 42.9%) or medial side (eleven specimens, 22.4%) of the posterior belly of digastric muscle. In 17 specimens (35%), the stylohyoid muscle existed on the medial side of the posterior belly of digastric muscle.